112 Training on focus areas after risk assessment At Bidar, besides 100% coverage of contract workers during health & safety induction, over 50% of the workers are trained further in specific topics related to their work. Around 650+ employees were trained in safety topics with 100% compliance. The topics of training are relevant for the target groups. Contract workers • Basic Fire Fighting & Fire extinguisher operation • PPE & it’s uses • Handling of sold waste • Work permit system (Hot/ Height/ Safety/ Ladder/ Scaffolding safety) • Handling of Drums/ Gas cylinder safety • Onsite Emergency Plan/ Mock drill • Occupational Health hazards/ Ergonomic & slip trip • Safe operation of Forklifts & Stackers • Hand/power tool safety (include LOTO) • Safe operation of vehicle movement • Chemical Hazards • Electrostatic hazards • Training on GEP and leakage reduction • Good engineering practices • Electrical safety and types of earthing • Training on fire panel operation • Process safety hazard & asphyxiant gas • Passenger lift rescue operation Employees • Training on Gas Cylinder safety, Ladder & Fall protection • Usage and Navigation of process map application • Hazardous waste management • HSE Legal Requirement and Management system • Selection, usage and Maintenance of PPE, Industrial hygiene • Scrubber operation & Material detoxification • Electrostatic hazard and their control • On-site Emergency plan and Mock drill • Work permit system & Electrical safety • Hazardous area classification & Process safety • Risk Assessment, Laboratory safety and Hazards of Nitrogen • Slip, Trip and fall hazard • Incident investigation trainings
RkJQdWJsaXNoZXIy MTIwMDc4NQ==